wood finishing with uv curable coatings
The industrial wood finisher has essentially three options in types of uv-curable coatings to use—100% uv, water-reduced uv and solvent reduced uv. each type of uv-curable coating can be applied by virtually any method of application.. That would be great — and we can. the technology that makes this possible is called uv curing. it has been in use since the 1970s for all sorts of materials including metal, plastic, glass, paper and, increasingly, for wood. uv-cured coatings cure when exposed to ultraviolet light in the nanometer range at the low end or just below visible light.. Uv cure topcoat finish: raw wood uv satin and gloss for tabletop, bar tops and furniture cabinets.
wood finishing with uv curable coatings
Specialty factory applied industrial wood coatings with uv (ultraviolet) / eb (electro beam) and wb (waterborne) technologies for enhanced appearance and performance with more than 100 years of wood industry experience, ppg solves coatings challenges with technology and lowers overall cost of operation with application expertise.. A little over ten years ago, it broke new ground in the industry with a clearcoat – the top layer of an automotive finish—that could be cured in minutes following exposure to ultraviolet light. in those days, when clearcoats needed to be baked at 60 degrees for 30 minutes or more, the energy savings with “uv-curable” coatings were huge..
No comments:
Post a Comment